3M Scotch Brite 7447 Abrasive Sheets - Fine - Pack of 10
Prod Code: MEA233076
Only £22.32 GBP (inc VAT)
£18.60 GBP (ex VAT)
Prod Code: MEA233076
7447 Hand Pads have long been the standard for surface conditioning by hand. Clean, blend, finish, and deburr faster and with better results than conventional abrasives. Perfect surface preparation tool for 3M VHB Tapes.
Size: 155mm x 225mm
Colour: Maroon
Grit: Fine
Surface Preparation Details.
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified.
Be sure to follow manufacturer's directions for use and precautionary warnings when using solvents (Steps A & B)
Bond strength is dependent upon the degree of adhesive-to-surface contact developed. Firm application pressure helps better adhesive contact and thus improves bond strength (Steps C & D)
After application, the bond strength will increase as the adhesive flows into the surface. At room temperature approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. In some cases bond strength can be increased and ultimate bond strength can be achieved more quickly by exposure of the bond to elevated temperatures (eg. 70°C for 1 hour). This provides better adhesive wetout onto the substrates.
Sorry, there are no products in this collection
Need more help or advice? 7447 Hand Pads have long been the standard for surface conditioning by hand. Clean, blend, finish, and deburr faster and with better results than conventional abrasives. Perfect surface preparation tool for 3M VHB Tapes.
Size: 155mm x 225mm
Colour: Maroon
Grit: Fine
Surface Preparation Details.
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified.
Be sure to follow manufacturer's directions for use and precautionary warnings when using solvents (Steps A & B)
Bond strength is dependent upon the degree of adhesive-to-surface contact developed. Firm application pressure helps better adhesive contact and thus improves bond strength (Steps C & D)
After application, the bond strength will increase as the adhesive flows into the surface. At room temperature approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. In some cases bond strength can be increased and ultimate bond strength can be achieved more quickly by exposure of the bond to elevated temperatures (eg. 70°C for 1 hour). This provides better adhesive wetout onto the substrates.
Need Help?
Give us a call, drop us an email, or simply fill in the form and one of the team will get back to you.
- +44 (0) 1535 610 373
- sales@vikingtapes.co.uk
- Unit 1, Coronation Business Park,
Hard Ings Rd, Keighley,
West Yorkshire,
BD21 3ND
This item has been added to your basket
Our Brands
