We can offer a full range of respiratory protective equipment tested to the relevant European Standards and CE certification
Selecting the correct respiratory protection requires a working knowledge of the relevant legislation, respiratory hazards and the various types of Respiratory Protective Equipment (RPE) that are available.
The selection of Respiratory Protection follows four basic step method:
Identify the hazards - Dust, mist, metal fume, gas, vapour.
Assess the hazards - Measure the hazard level. Assess other protection - skin and eye.
Select the proper respirator - Disposable half mask, full face, powered, airline.
Training in fitting and use - To optimise respiratory protection.
When matching the performance of Respiratory Protection to the measured respiratory hazard level, the Assigned Protection Factor should now be used in the place of the Nominal Protection Factor.
Nominal Protection Factor (NPF) - derived from the performance categories of the European Standards to which all respirators are tested.
Assigned Protection Factor (APF) - based on workplace protection factor studies and listed in BS4275. This figure is used for selection calculations.
P3SL Respirator: Dusts, Mists, Metal Fume EN149 FFP3SL APF: 20 x OEL
8835 Dust/Mist/Metal Fume Respirator
Nuisance Dust Mask
8500 Nuisance Dust Mask Offers relief from coarse particles of non-toxic/nuisance dusts.
The 3M™ 4000 Series
A range of totally unique respirators which use new technology to provide effective protection combined with exceptional
comfort. Fully disposable, the integral construction offers reliable protection against most gases, vapours and particulates. This is complemented with a parabolic value reducing breathing resistance whilst preventing heat build up.
Incorporating a soft, hypo-allergenic facepiece material and central exhalation valve, the 3M™ 6000 Series Half Masks and Full Face Masks are cool and comfortable to wear. Combined with the 3M™ 6000/2000 Series bayonet attachment filters to provide protection against a range of hazards.
6051 A1 Organic Vapour Filter
6055 A2 Organic Vapour Filter
6054 K1 Ammonia Filter
6057 ABE1 Organic Inorganic Vapours and Acid Gas Filter
6075 A1 and Formaldehyde Filter
6099 ABEK1 Organic, Inorganic, Acid Gas & Ammonia Derivatives Filter
6099 ABEK2P3SL Organic, Inorganic, Acid Gas & Ammonia & Particulate Protection Filter (Full face only)
6098 AXP3SL For use against Single Compound Organic Vapours & Particulate Protection (Full face only)
Particulate Filters
P1, P2 and P3 with Ozone Filters also available to fit face masks