Why should I use Glue Dots over other adhesives?

Glue Dots are faster and safer than hot glue guns, cleaner than liquid adhesives and leave no sticky residue like double sided tapes. Eliminate hot glue burns, fumes and set-up times.

Back to Top

Are Glue Dots safe to use?

Yes. Glue Dots are non-toxic, odorless, FDA-approved for direct or indirect food contact and conform to ASTM D-4236. Unlike hot glue guns, there's no risk of incurring serious burns.

Back to Top

How can Glue Dots be more cost-effective when they're applied manually?

Glue Dots can be applied quickly and cleanly (reducing rejects from the QC line), no set up time is required and no drying time is necessary. All of these factors equate to better productivity and cost efficiencies.

Back to Top

Can Glue Dots be used in an assembly line?

Incorporating applicators designed to apply our products into your assembly process can increase your efficiencies.

Back to Top

What materials do they adhere to?

Glue Dots adhere to a wide variety of materials, including paper, plastic, foil, glass, aluminum, Styrofoam, wood, and Teflon. If the substrates you're working with are questionable, contact us at 01535 610373 or by email

Back to Top

How can I be assured of the best bond possible?

Moisture, oils, dust, lotions and some silicone-coated products may interfere with the bonding quality, so make sure surfaces are clean and dry.

Back to Top

Why use a 3/4 inch dot over a 1/2 inch dot?

Your choice will depend on the size/surface area of the materials you are adhering. There is a direct correlation between the amount of surface contact and the overall strength of the bond. 1/2" diameter dots(as well as several Glue Shapes) are designed for maximum surface area contact.

Back to Top

Do you manufacture fugitive glues?

The term "fugitive" commonly refers to removable adhesives. Many of our products meet that definition.

Back to Top

What is the difference between Tack Level and Profile?

"Tack" refers to the aggressiveness of the adhesive. "Low Tack" dots are removable. On most surfaces "Super High Tack" and "High Tack" dots would be considered permanent. "Profile" refers to the thickness of the dot. "Low Profile" dots are flat compared to "High Profile" dots which are 2/3mm thick. Medium and High Profile dots are best suited for round, concave or irregularly shaped objects

Back to Top

Does it matter what tack level I use?

Yes. As the end-user, you are the best judge of the bond strength required for your application. Your Glue Dots Distributor can assist you in determining the best product for your needs by supplying you with a variety of samples to test.

Back to Top

When should I consider a custom pattern?

In cases where unusual shapes or materials are used, or the bond is under a great deal of stress, a custom pattern may be necessary. Based on your application, we can advise you on the best product for your needs.

Back to Top

What is the shelf life of Glue Dots?

While the dots will not degrade over time, contaminants such as moisture and dust can interfere with the bonding qualities. We recommend you replace the product after 18 months and always store in a clean, dry place.

Back to Top

What are the hottest and coldest temperatures Glue Dots can withstand?

This will depend on the amount of stress the bond is under. In some cases, our Research and Development Department may develop a custom adhesive especially for your application.

Back to Top

Where can I purchase Glue Dots Adhesive Products?

You are able to purchase Glue Dots products on-line by clicking here.

Back to Top

We also provide a range of Hobby, Educational and DIY Retail Adhesive Dots. Click the banner below to buy on-line.

For any other information please feel free to contact us